Hydraulic Punching Machine – Setup

We, at Mahendra Tools, always strive to give the best advice as possible to our clients, based on our decades of experience.

However sometimes the other way happens. The clients show amazing creativity and ingenuity and we are bowled over at the output.  Here is one such case where the client has built a fantastic contraption to carry the Hydraulic Punching Machine – NITTO KOHKI HA11-1624.

Here are some of the images :-

Puncher NITTO KOHKINITTO KOHKI Hydraulic Puncher

For more details about the NITTO KOHKI Portable Hydraulic Puncher, please click here

And of course, you can always contact us on mahendra@mahendratools.com

Tagged with: , , , , , ,
Posted in Machine Tools, Uncategorized

Punching 25mm dia hole in 16mm thick plate. NITTO Hydraulic Puncher

Portable Hydraulic Puncher

The Puncher HA11-1624 with Pump SC-05 can be used to punch a hole of upto 25mm in diameter in a plate of thickness upto 16mm.  It does the job in a very fast, cost-effective, and efficient manner.

Here is a video demo shot at our client site doing the maximum capacity punch of 25mm diameter in a 16mm plate. You have to see it to believe it!

 

 

For more details, contact us on mahendra@mahendratools.com

Tagged with: , , , , ,
Posted in Machine Tools

NITTO KOHKI Circuit Beveler CB-02

NITTO KOHKI Circuit Beveler CB-02 – live in action at Client’s site.

Uniquely designed to chamfer circular, elliptical and straight line profiles.

Chamfers exterior and/or interior edges.

Depth gauge provided to accurately set chamfer width.

 

For more details contact us :- mahendra@mahendratools.com

 

 

Tagged with: , , , ,
Posted in Uncategorized

Size does matter – Cordless Magnetic Drilling Machine

Nitto Kohki CLA-2720 Cordless Atra Ace – Size does matter!!

Nitto Kohki have expanded their ‘ATRA ACE’ range of magnetic base drilling machines with the release of their revolutionary CLA-2720 Cordless ‘Atra Ace’.

 

 

Showcased recently, interest in the machine has been strong. Being the most compact and lightweight machine available in today’s market at just 7kg (including feed handle and battery), it’s easy to see why!

The CLA-2720 is supplied complete with 2 x 18v, 4.0ah Lithium-ion batteries giving it a maximum capacity of 27mm diameter holes through 20mm thick mild steel.

As you would expect from Nitto Kohki, the CLA-2720 boasts a range of unique safety features that include a visual motor overload indicator and side slip detection function, it is also fitted as standard with a fine drilling position adjustment once the magnet has been energised.

The CLA-2720 comes with the ‘One-Touch’ tool-less cutter replacement for quick and easy changeover which is found throughout the ‘Atra Ace’ product range, and a unique ‘quick-release’ feed handle which can be changed from one side to the other in seconds.

 

 

Tagged with: , , ,
Posted in Uncategorized

Automatic vs Manual Portable Drilling Machine – NITTO KOHKI

Magnetic Drilling Machine NITTO KOHKI Auto-Feed

Why Auto-Feed and Auto-Control machines are much better than Manual Drilling machines.

First let us have a look at the video here :-

http://www.youtube.com/watch?v=d-01gTKgxKY

1. AUTO FEED – NITTO make drilling machines Being AUTO FEED there is uniform pressure applied on the Broach Cutter during the operation which results in more life of broach cutters(MAXIMUM no. of holes). Because of uniform pressure the broach cutter does not over heat, which keep the teeth of the cutter safe from becoming blunt or get broken.
MANUAL – On the other hand when the Operator operates the machine manually (Manual Feed), non-uniform pressure is applied on the broach cutters, sometimes less pressure is applied and sometimes more because of this the cutter(of any Brand) gets heated and gets blunt more easily which results in lower life of Cutters.

2.AUTO FEED – There is load sensor in NITTO make Auto Feed Auto Control Machine,
because of this the machine will never take excess load, whenever there is excess load the machine will trip the motor. This reduces the chances of the cutters getting damaged to a great extent.
MANUAL – While in manual machine there are no such sensors and when non uniform manual pressure is applied, the cutters get damaged very easily, resulting in higher operation cost.

3.AUTO FEED – There is load sensor in NITTO make Auto Feed Auto Control Machine,
because of this in case of excess load the motor trips, this reduces the maintenance and protects the electrical components. This leads to very low breakdown and high productivity.
MANUAL – There is no such safety feature in these machines, and this results in higher maintenance and higher breakdowns. Thus decreasing the productivity and affecting smooth and continues production.

4.In NITTO make machines the cutting oil comes centrally from the arbor and automatically stops after the operation, thus no cutting oil is wasted.

5.SAFETY Features in NITTO machines:
If there is power failure, the machine stops operating and when the power comes back, it does not start automatically, thus avoiding injuries and hazards.

6. NITTO drilling machine can easily be used in a horizontal position to drilling holes in vertical beams.

These features are absent in other lower quality manual feed machines
The main cost of drilling is not that of the machine but of the broach cutters which needs to be procured regularly and this is where NITTO saves you a lot of money. Being an Automatic machine, NITTO- Japan make drill machine has load sensors which regulates the speed of drilling and the feed based on the load. In the case that the load increases too much then the machine trips off. This ensures that there is always uniform load on the cutter. So for a big company/project which has hundreds of holes to drill everyday, it makes a lot more sense to buy a better quality ( Japan make) automatic machine than purchasing an inferior quality product with regular breakdowns and high operational cost.

Tagged with: , , , ,
Posted in Uncategorized

Happy client with WA-5000 NITTO Magnetic Drilling Machine

It always gives us great satisfaction whenever we see a happy client! It makes us feel that all our efforts are worth it.

IMG_5142IMG_5143IMG_5145

For further details please contact mahendra@mahendratools.com

Posted in Uncategorized

Visit us at IMEX 2014 in New Delhi. 4-6 September

IMEX-Signature

Posted in Uncategorized

TCT and HSS Broach Core cutter – NITTO KOHKI Japan make

NITTO KOHKI Japan make TCT and HSS cutters are available from 12mm dia upto 100mm dia and in lengths from 25mm to 75mm.

These cutters are made completely in Japan. They provide the best efficiency and value for money in terms of cost per hole. NITTO KOHKI cutters are made specifically for Magnetic Drilling Machines unlike other cutters which tend to damage the machine.

Some of the features of NITTO TCT cutters are :-

  • Carbide tips for faster cutting
  • Single pass cutting, no pilot hole required
  • Annular part does all the work so small cutting resistance reduces drilling time
  • Cutting of slanted, elongated and edge holes is now possible
  • Fractional and metric cutter sizes to suit wide range of applications
  • Produces little slag and few chips for easy disposal
  • Can also be fitted to and used with previous Atra Ace models using a hexagon socket set-screw
  • Improved concentricity extends cutter life! One-touch system consisting of three balls inside the arbor body produces a self-centering effect during cutting to improve cutter performance and life

Broach cutter

TCT cutter NITTO

For more information about the NITTO cutters please feel free to contact us at:- mahendra@mahendratools.com. We keep huge stock of all the cutter sizes.

Tagged with: , , ,
Posted in Machine Tools

Light Weight Compact Magnetic Drilling Machine – NITTO KOHKI

NITTO LO 3550 weights only 8.7kgs and is extremely compact making it suitable for use where space is a constraint.

Here is the video demo which shows this fantastic machine in operation.

 

For more details please feel free to contact us at mahendra@mahendratools.com

Tagged with:
Posted in Uncategorized

Electric Needle Scalar – NITTO

  • Operated with Standard Electric Supply to Households
  • Powerful 300 watt double insulated motor
  • Extended length, slim barrel design
  • Adjustable front handle for operator comfort and convenience

NITTO Electric Needle Scalar

For more information please contact us at mahendra@mahendratools.com

Posted in Uncategorized